Sony NEX-5T - Access Point Settings; Manually Registering Access Points

196
GB
Table of
contents
Sample photo Menu Index
Access Point Settings
You can register your access point manually.
Before starting the procedure, check the SSID name of the access point, security system,
and password. The password may be preset in some devices. For details, see the access
point operating instructions.
• When aboard an airplane, turn off the camera.
1 MENU t [Setup] t [Access Point
Settings].
2 Select the access point you want to register.
When the desired access point is displayed on the screen:
Select the desired access point.
When the desired access point is not displayed on the screen:
Select [Manual Setting] and set the access point.
* For the input method, refer to “How to use the keyboard.”
If you select [Manual Registration], input the SSID name of the access point t select the
security system.
3 Input the password.
Access points that do not display do not require a
password to be entered.
4 Select [Memory], then register the settings.
Notes
Continued r