60
GB
Table of
contents
Sample photo Menu Index
Using functions in the menu
ISO
Sets the luminous sensitivity.
1 (ISO) on the control wheel t desired setting.
Or, MENU t [Brightness/Color] t [ISO] t desired setting.
• [ISO AUTO] is selected when using the following functions:
– [Intelligent Auto]
–[Superior Auto]
– [Scene Selection]
– [Sweep Panorama]
• The larger the number, the higher the noise level.
• When the shooting mode is set to [Program Auto], [Aperture Priority], [Shutter Priority], and [ISO] is set
to [ISO AUTO], ISO is automatically set between ISO100 and ISO3200.
• For movie shooting, the maximum ISO sensitivity you can set is ISO6400. If a value higher than
ISO6400 is set when shooting movies, the value is automatically changed to ISO6400, and the value
returns to the original setting when movie shooting is finished.
• The [ISO AUTO] setting is not provided in [Manual Exposure]. If you change the exposure mode to
[Manual Exposure] with the [ISO AUTO] setting, it is switched to 100. Set the ISO according to your
shooting conditions.
(ISO AUTO) Sets the ISO sensitivity automatically.
100/200/400/800/
1600/3200/6400/
12800/25600
Sets the sensitivity to light of the imaging sensor. Higher
sensitivities enable faster shutter speeds and/or smaller apertures
(larger F-values).
Notes
z Adjusting ISO Sensitivity (Recommended Exposure
Index)
ISO setting (speed) is the sensitivity to light of recording media that incorporates an image
sensor that receives light. Even when the exposure is the same, images differ depending on
the ISO setting.
High ISO sensitivity
With high ISO sensitivity, images will be captured with an
appropriate brightness even under insufficient exposure.
However, increasing ISO sensitivity will cause images to
become noisy.
Low ISO sensitivity
You can record smooth images. However, compensation for
low ISO sensitivity will be made by slowing down the shutter
speed. You should take camera-shake or movement of
subjects into account, too.
To Next Page
Loading...
Need help?
General
