Sony NEX-5T User Manual

122
GB
Table of
contents
Sample photo Menu Index
View on TV
If the camera and TV are not connected using an HDMI cable, you can view images on a
network-enabled TV by transferring the image from the camera.
You can change the settings for the slideshow by pressing OPTION.
* The settings are effective only for BRAVIA TV which is compatible with the functions.
• You can use this function on a TV that supports DLNA renderer.
• You can view images on a Wi-Fi Direct-enabled TV or network-enabled TV (including cable TV).
• When you use a Wi-Fi Direct-enabled TV, you can view images even if the TV is not connected to
network.
• If you connect TV and the camera and do not use Wi-Fi Direct, you need to register your access point on
the camera first (pages 195, 196).
• Displaying the images on the TV may take time.
• Movies cannot be shown on TV using Wi-Fi. Use an HDMI cable (sold separately).
1 MENU t [Playback] t [View on TV] t desired device to be connected.
2 When you want to play back images using
slideshow, select .
To play back images manually, press the right/left side
of the control wheel.
To change the device to be connected, select OPTION to
select [Device list].
Slideshow setting
Playback Selection
Selects the group of images to be shown.
Selects from [All Images in The Device] or [All in Folder].
Interval
Selects from [Short] to [Long].
Effects*
Selects from [On] and [Off].
Notes

Sony NEX-5T Specifications

General

Sensor Type	CMOS
Sensor Size	APS-C (23.5 x 15.6 mm)
Effective Pixels	16.1 MP
ISO Range	100-25600
Autofocus Points	25
Lens Mount	Sony E-mount
Image Processor	BIONZ
Screen Size	3.0"
Screen Resolution	921, 600 dots
Video Resolution	1920 x 1080
Video Frame Rate	60p, 60i, 24p
Maximum Shutter Speed	1/4000 sec
Minimum Shutter Speed	30 sec
Continuous Shooting	10 fps
Built-in Flash	No
External Flash	Yes (via hot shoe)
Wireless Connectivity	Wi-Fi, NFC
Battery	NP-FW50
Battery Life	330 shots
Dimensions	110.8 x 58.8 x 38.9 mm
Weight	276 g (with battery and memory card)