Sony PS-6750 - Tonearm Adjustments

TONEARM ADJUSTMENTS
Perform the following procedures on a level surface.
Preparation
@ Secure the Arm to its rest.
@ Plugging the Shell into the Arm, turn the Locking collar
counterclockwise until the shell is firmly locked.
© Insert and turn the Counterweight counterclockwise. (The
Tracking-force ring turns simultaneously.)
@ Remove the Stylus guard if fitted and assure that the Anti-
skating compensator locking knob is turned fully counterclock-
wise.
© If your cartridge is heavier than 10g (up to 154), install the
extra weight; insert into the arm pipe end and turn counter-
clockwise.
Counterweight
Anti-skating compensator
locking knob
Match the pin on the
shell with the upper
slot of the arm.