40
Timer Recording
Checking the disc status while
recording
You can check the recording information such as recording time
or disc type.
a Press DISPLAY twice during recording.
The recording information appears.
1 Disc type/format
2 Recording status
3 Recording mode
4 Recording time
b Press DISPLAY to turn off the display.
Creating chapters in a title
The recorder can automatically divide a recording (a title) into
chapters by inserting chapter marks at 6 or 15 minute intervals
during recording. Select the interval, “6Min” (default) or
“15Min” in “Auto Chapter” of Features Setup (page 97).
z Hint
You can make chapters manually when playing DVD-RWs (VR mode).
For details, see page 67.
Notes
• If “Auto Chapter” is set to “Off” in Features Setup, no chapters are
automatically created.
• When no more chapter marks can be added, you may not be able to
make additional recordings or edit the disc.
Timer Recording
You can set the timer for a total of 30 programs up to one month
in advance.
There are two setting methods: the manual setting and VCR
Plus+ setting.
• Standard: Set the date, time, and channel of the program
manually.
• VCR Plus+: Enter the PlusCode number designated for each
TV program (page 44).
Setting the timer manually (Standard)
a Press }/1.
b Turn on the TV, and switch the input selector
on your TV so that the signal from the
recorder appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and select the
appropriate channel so that you can hear sound from
the recorder.
c Press Z OPEN/CLOSE, and place a
recordable disc on the disc tray.
1:23:45SP
DVD-RW
VIDEO
Before you start…
• Check that the disc has enough available space for the
recording (page 37).
• Adjust the recording picture quality and picture size if
necessary (page 46).
SYSTEM MENU
</M/m/,,
ENTER
"/1Z OPEN/CLOSE
[TIMER]
RETURN
TOOLS
x REC STOP
To Next Page
Loading...
Need help?
General
