44
Timer Recording
c Press M/m to select the setting for which you
want to change a priority order, then press
ENTER.
The sub-menu appears.
d Press M/m to select “Check Overlap,” then
press ENTER.
The display for confirming overlapped settings
appears.
e Press </, to select “Change priority,”
then press ENTER.
The display for changing priority appears.
f Press M/m to move the timer setting where
you want, then press ENTER.
The program moves to its new location in the list. A
program higher up in the list has higher priority.
To return to the Timer List, select “Cancel.”
g Press RETURN to turn off the Timer List.
Recording TV programs using the VCR
Plus+ system
The VCR Plus+ system is a feature that simplifies setting timer
recordings. Just enter the PlusCode number listed in the TV
program guide. The date, time, and channel of that program are
set automatically.
Check that the TV and guide channels are correctly set in “Set
VCR Plus+ Channels” in “Settings” (page 93).
a Press }/1.
b Turn on the TV, and switch the input selector
on your TV so that the signal from the
recorder appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and select the
appropriate channel so that you can hear sound from
the recorder.
c Press Z OPEN/CLOSE, and place a
recordable disc on the disc tray.
d Press Z OPEN/CLOSE to close the disc tray.
Wait until “LOAD” disappears from the front panel
display.
If you use an unused DVD, formatting starts
automatically.
When using an unused DVD-RW, select the
recording format, VR or Video.
Mon-Sat 10:00AM - 10:30AM 25ch SP
Wed 10/29 9:00AM - 10:15AM 3ch SLP
Check Overlap
These timer settings overlap.
Change priority Close
3ch Wed 10/29 9:00AM
Where do you want to move this timer setting?
25ch Mon-Sat 10:00AM
Change priority
Cancel
</M/m/,,
ENTER
"/1Z OPEN/CLOSE
[TIMER]
Number
buttons
x REC STOP
CLEAR
SET
RETURN
To Next Page
Loading...
Need help?
General
