• Using a battery other than the specified one may
result
in
the battery rupturing.
• Dispose
of
used batteries as specified
by
the local
authorities.
• Do not leave the remote control
in
a very hot and
humid place.
• Take care that no foreign objects enter inside the
remote control when you. for example. replace the
battery.
• Incorrect use
of
the battery may cause leaking and
corrosion.
-
Do
not recharge the battery.
- When the remote control
wi
1\
not
be
used
for
a
long period
of
time. remove the battery from the
remote control to prevent leaking and corrosion.
- Incorrectly inserting. shorting. dismantling. or
heating the battery. or throwing
it
into a fire
may cause the battery to rupture and leak.
About descriptions
in
this
manual
The operations described
in
this manual are
based on remote control operation. When
an
operation
is
performed differently with the
remote control and buttons on photo frame.
it
will
be
explained
in
a tip.
Connecting
to
the
AC
power
source
1 Insert the plug of the
AC
adaptor
into the
DC
IN
12
V jack on the rear
of the photo frame.
2 Connect the
AC
adaptor to the wall
outlet.
I
To wall outlet
AC adaptor
• A socket outlet should
be
as close
as
possible
to
ullit
and easily accessible.
• Do not place the photo frame
in
an
unsteady
location such
as
on
an
uneven table or tilted surface.
• Connect the
AC
adaptor to
an
easily accessible wall
outlet close by. If trouble occurs while using the
adaptor. immediately shut off the power
by
disconnecting
the
plug from the wall outlet.
•
Do
not short the plug
of
the AC adaptor with a
metal object. Doing
so
may cause a malfunction.
•
Do
not use the
AC
Adaptor placed
in
a narrow
space. such as between a wall and furniture.
Continued
11
GB
To Next Page
Loading...
Need help?
General
