Changing
the
various
settings
Setting
procedure
You can change display, slideshow, brightness,
language, and other settings
of
the photo frame.
It
is also possible to reset the settings to their
factory defaults and format the intenal memory.
Only internal
memory
can be formatted.
1 Press MENU.
The menu
is
displayed.
2 Press
+1+
to select [Various
settings] and then press
0 to
display the Various settings screen.
3 Press
+1+
to select the item you
want to change and then press
O.
The setting screen
of
the selected item
is
displayed.
For example, when [Slideshow Settings]
is
selected.
26
GB
4 Press
+1+
to select the item you
want to change and then press
O.
This enables you to set each
of
the items
(page 27).
When the photo frame is, for instance,
displaying a slideshow,
some
items are
unavailable for changing the settings. They are
displayed
in
gray and
cannol
be selected.
5 Press
+1+
to select a setting value
and then press
O.
Each time you press .1+
(.1+
from the
photo frame), the setting value changes. In
the case
of
a numerical value, press +to
increase the value and
press.
to decrease
the value.
If
you press
0,
the setting
is
confirmed.
6 Press MENU.
The menu closes.
Tips
•
To
perform this operation from the photo frame,
press MENU, press the direction buttons to select
the item, and then press
-+-
ENTER.
•
To
reset the settings to their factory defaults, select
[Reset] and then press
O.
Adjusted values except
clock setting are reset to default settings.
To Next Page
Loading...
Need help?
General
