Place the label here.
SD
memory
card
• You cannot record, edit
or
delete data if you
slide the write-protect switch
to
LOCK.
»
Q.
Q.
::J
0'
.....
3
OJ
=:
o
::J
Write 1
protect
!
position .
..
I
~J
Write-protect switch
r-::;-.:--
J Write
enable
position
T
I I
I
L----'
!
•
Do
not attach any
other
material than the
supplied label on the labelling position.
When you attach the supplied label, be sure
to attach
it
to the labelling position. Be
careful that the label does not stick out.
The SO memory card slot
of
the photo frame
allows you to use the following:
•
SD
memory card*'
• miniSD card, microSD card
(An adaptor
is
necessary.)'"
•
SDHC
memory card'·'
•
MMC
standard memory
card*4
We
do not guarantee
proper
operations for all
types
of
SO memory
cards
and
MMC
standard
memory cards.
'I
The
photo frame has been
demonstrated
as
operable with an
SD
memory
card
with a capacity
of
2 GB
or
smaller.
-
Some
commercially
available
card
adaptors have
projected terminals on the rear.
This
type
of
adaptor may not work properly with the
photo
frame.
The
photo frame has been
demonstrated
as
operable with an
SDHC
memory
card with a
capacity
of
8 GB
or
less.
The
photo frame has been
demonstrated
as
operable with an
MMC
standard
memory
card with
a capacity
of
2 GB or less.
Notes on use
protection technology developed by Sony using
authentication and encryption.
'f,
The
photo
frame does not support 8 bit parallel
data transfer.
•
For
the latest information on the
"Memory
Stick" types that the photo frame supports,
see the "Memory Stick" compatibility
information on the Sony web site:
http://www.memorystick.cOln/en/supporti
support.html
(Select the area where you use your photo
frame, and then select "Digital Photo
Frame"
from
each
area page.)
•
Do
not insert more than one
"Memory
Stick"
at the
same
time, which may cause trouble
with the photo frame.
•
If
you use a "Memory Stick Micro" with the
photo frame,
"Memory
Stick Micro" needs
to be inserted into an
"M2"
adaptor.
•
If
you insert a
"Memory
Stick Micro" into
the photo frame without an
"M2"
adaptor,
you may be unable to remove the
"Memory
Stick Micro".
•
If
you insert a "Memory Stick Micro" into an
"M2"adaptor, and insert the
"M2"
adaptor
into a
"Memory
Stick Duo" adaptor, the
photo frame may not operate properly.
• When you format a
"Memory
Stick", use the
format function
of
your digital camera.
If
you format a
"Memory
Stick" with your
computer, images may not be displayed
properly.
•
When
you format a
"Memory
Stick", all the
data including protected image files will be
erased.
To
avoid erasing important data by
accident. make sure
to
check the contents
of
the
"Memory
Stick" before formatting.
Continued
37
GB
To Next Page
Loading...
Need help?
General
