Advanced
operations
Specifying
the
playback
device
You can specify the
memory
card to be
displayed.
1 Press MENU.
The menu
is
displayed.
2 Press
+1+
to select [Select device]
and then press
8.
The screen for selecting a device is
displayed.
Tip
Insert the device at this procedure
if
no device
is
inserted.
3 Press
+1+
to select the device you
want to display and then press
8.
The
images
of
the selected device are
displayed.
Tip
To
perform this operation from the photo frame, press
MENU,
press the direction buttons to select the
device you want to display, and then press
-+-
ENTER.
Adjusting
the
image
size
and
position
Enlarging
an
image
1 To enlarge
an
image, press
<f<
(zoom in)
on
the remote control. To
reduce an enlarged image, press
E<
(zoom out).
Each press
of
the
<f<
button enlarges the
image further. You can enlarge an image
to
maximum
4 times the original scale.
You can
move
an
enlarged
image up,
down, left,
and
right.
• Enlarging an image may reduce the quality
depending on the image size.
• It
is
not possible to enlarge
an
image with buttons
on the photo frame.
• Depending on images,
2x
will be the
maximum
enlargement.
Rotating
an
image
1 Press @ (rotation)
on
the remote
control.
Each press
of
the button rotates the image
90
degrees counter-clockwise.
To perform the operation from
the menu of the remote control
1 Press MENU.
The
menu
is
displayed.
Continued
21
GB
I
To Next Page
Loading...
Need help?
General
