Connecting
to
a
computer
Connecting
to
a
computer
You can connect to a
computer
to view and
copy images
of
the internal
memory
of
the
photo frame to the computer, and copy images
of
the
computer
to the photo frame.
System
requirements
To
connect
a computer to use the picture frame,
your
computer
must satisfy the following
recommended
system requirements.
• Windows
Recommended
as: Microsoft
Windows
Vista,
Windows
XP
Service Pack 2
or
Windows
2000
Professional Service Pack 4
(pre-installed at the time
of
shipment from the
factory)
Port:
USB
port
• Macintosh
Recommended
as: Mac as x
(lOA)
or
later
(pre-installed at the time
of
shipment from the
factory)
Port:
USB
port
• If multiple USB devices are connected to a
computer
or
if
a hub
is
used, a problem may occur.
• You cannot operate the photo frame from another
USB device being connected simultaneously.
•
Do
not disconnect the USB cable during data
communication.
• Operation with all computers that satisfy the
recommended system requirements is not
guaranteed.
•
The
photo frame has been demonstrated as
operable with connecting
to
PC or Sony digital
photo printer. When other devices are connected to
the photo frame. these devices may not recognize
the internal memory
of
the photo frame.
Connecting
to
a
computer
to
exchange
images
1 Connect the photo frame to the
AC
power source.
(~page
11)
2 Connect the computer and photo
frame with a commercially available
USB cable (optional: VMC-
14UMB2)*.
To USB connector
* This cable may not be available in all
countries.
Use a mini B-Type USB cable that
is
less than 3
meters long.
3 Press
C)
(on/standby) on the photo
frame to turn on the power.
4 Exchange images with the internal
memory of the photo frame by
performing operations from the
computer.
Continued
29 GB
I
()
o
:::J
:::J
CD
(")
-
:::J
<0
0-
ro
(")
o
3
""0
C
-
CD
.....
To Next Page
Loading...
Need help?
General
