• Single image display
To display an image you want to display
•
During
a slideshow, press 8 at an
image
you
want
to display.
• In the index image display. press
+/+/+/+
to
select an
image
you want to display and then
press
8.
You
can also press
~
(zoom in).
Tip
To
perfonll this operation from the photo frame. press
-+-
ENTER
at
an image you want to display during a
slideshow. In the index image display. press the
direction buttons to select an image and then press
-+-
ENTER.
Pressing
VIEW
MODE
changes the
modes
in
the following order.
Tip
You
can
set the image display mode
except
image
infol111ation
mode
with [Display
Madej
in the
[Various settings] menu (page 27).
Not
all images are
able to be [Fit to screen].
Entire image mode
Displays
an
entire image in the screen. You can
switch
the images to display by
pressing
+/+.
Fit to screen mode
Displays
an image
over
the whole
screen.
You can switch the
images
to display
by
pressing
+/+.
Image information mode
Displays
image
information
such as the
image
number,
file name,
and
shooting date.
You
can
switch
the images to display
by
pressing
+/+.
The
following information is displayed.
• Input/setting indications
Input indications and settings
information
for an image are displayed.
18
GB
Icons
Meaning
"Memory
Stick" input
SO
Memory
Card
input
CompactFlash
input
xD-Picture
Card
input
Internal
memory
input
Protect indication
Associated
file indication
(Displayed
when there is
an
associated
fi
Ie
such as a
motion
file
or
a miniature e-mail
image
file.)
To Next Page
Loading...
