Sony SAT-A55P User Manual

34
3
Select “Yes”.
TheRFSecurityCodepop-upappears.
4
Select a different security code.
The conformation pop-up appears.
5
Press the CODE SET button on the remote control.
The CABLE and TV FUNCTION indicators flash.
6
Enter the three digit security code you selected for the
receiver in step 4 above.
7
Press the enter button.
The remote control and Digital Satellite Receiver are now set to a
new security code.
8
Select “OK” to save your changes.
TheRemoteControldisplayappears.
Note
If the remote control no longer operates
your Digital Satellite Receiver after
completing this procedure, use the
controls on the front panel to open the
Remote Control display (see page 32).
Then repeat the steps in “Setting the
SecurityCode”totryagain.
CODE SET
FUNCTION
SAT
CABLE
TV
ENTER
Setting Up Your Digital Satellite Receiver (SYSTEM)
(continued)

Sony SAT-A55P Specifications

General

Brand	Sony
Model	SAT-A55P
Category	Receiver
Language	English