Super Audio CD + CD (Hybrid disc)
This disc consists of an HD layer and a CD layer Press
SACD/CD to select the layer you want to listen to Also,
as the dual layers are on one side, it is not necessary to
turn the disc over You can play the CD layer using a
conventional CD player
CD layer
HD (Super Audio CD)
layer
You can select the default playback layer (HD or CD)
1
During stop mode, press MENU
2 Turn W AMS DDU to until “LAYER SELECT”
appears in the display
3
Press UC4 AMS DDU.
The current default layer appears
4 Turn WAMSDDU to select CD or SACD, then push
KIUAMSDO! again.
The default layer setting is SACD
2 channel Super Audio CD
This disc consists of the 2 channel playback area
When you play this disc, the player is set to the 2 channel
playback mode automatically
2 channel playback area
Multi-channel Super Audio CD
This disc consists of the multi-channel playback area
When you play this disc, the player is set to the multi-
channel playback mode automatically
2 channel + Multi-channel Super Audio CD
This disc consists of the 2 channel playback area and the
multi-channel playback area
Press MULTI/2CH to select the playback area you want to
listen to
2 channel playback area
Multi-channel playback
area
You can select the default playback area (2 channel
playback or multi-channel playback area)
1
During stop mode, press MENU.
2 Turn UO-4 AMS DDll to until “M/ZCH SELECT”
appears in the display.
3
Press IKKI AMS DDU.
The current playback area appears
4 Turn U44 AMS DD! to select desired playback area,
then press KICI AMS DDU.
This player cannot play the following discs If you try to
play them, the error message “TOC Error” or “No Disc”
will appear or there will be no sound
l CD-ROM
l DVD, etc
1
To Next Page
Loading...
