Rear Panel Parts Descriptions
q
ANALOG 2CH OUT L/R jacks (6)
Connect to an audio component (stereo/2 channel)
using the audio connecting cord
q
ANALOG 5.1CH OUT jacks (5)
Connect to an amplifier equipped with the 5 1CH
input jacks (Multi-channel amplifier, AV amplifier,
etc ) using the audio connecting cords
q
DIGITAL (CD) OUT OPTICAL connector (7)
Connect to an audio component using an optical
digital cable
q
DIGITAL (CD) OUT COAXIAL connector (7)
Connect to an audio component using the coaxial
digital cable
q
CONTROL Al II jacks (7,31)
Connect to a Sony audio component using the
monaural (2P) mini-plug cord
Note
Only the audio signals of the CD can be output from the
DIGITAL (CD) OUT connectors shown in
q
and
q
Those of the
Super Audio CD cannot be output through DIGITAL (CD) OUT
c,
10"'
To Next Page
