Using the CONTROL Al11
This chapter provides ~dditio~~al
~~~fo~~~at~on that wifl help you
~~~d~~~t~K~d and Inaint~il~ your Super
Audio CD player.
control system
This player is compatible with the CONTROL Al11
Control System
The CONTROL A111 control system was designed to
simplify the operation of audio systems composed of
separate Sony components CONTROL Al11 connections
provide a path for the transmission of control signals that
enable automatic operation and control features usually
associated with integrated systems
Currently, CONTROL Al11 connections between a Sony
MD deck, CD player, amplifier (receiver), and cassette
deck provide automatic function selection and
synchronized recording
In the future the CONTROL Al11 connection will work as
a multifunction bus allowing you to control various
functions for each component
Note
The CONTROL Al11 control system is designed to maintain
upward compatibility as the control system is upgraded to
handle new functions In this case, however, older components
will not be compatible with the new functions
The CONTROL Al control system has been updated to
the CONTROL Al11 which is the standard system in the
Sony 300 disc CD changer and other recent Sony
components Components with CONTROL Al jacks are
compatible with components with CONTROL AlII, and
can be connected to each other Basically, the majority of
the functions available with the CONTROL Al control
system will be available with the CONTROL Al11 control
system However, when making connections between
components with CONTROL Al jacks and components
with CONTROL Al11 jacks, the number of functions that
can be controlled may be limited depending on the
component For detailed information, refer to the
operating instructions supplied with the component(s)
-
To Next Page
Loading...
