Labeling Discs (Disc Name)
5 Press the number button to input letters.
To input a letter, press the number button
corresponding to the letter you want (indicated beside
each number button)
Each time you press the button, the letter changes
cyclically among the ones indicated beside the button
To input symbols, press the number button 1
repeatedly until the symbol you want appears in the
display
Characters assigned to each
number button
Example: To select the letter E
Press the number button 3 twice
*D-E-F
Press 3 Press 3
1
Press 3
To insert a space, press SPACE once
To input a number, press the number button you want
6
Press H to select the character.
The selected character lights up, and the flashing
cursor appears to indicate the next space to be input
7zj
You can also go to the next space by pressing other
%
number buttons
0
z.
7 Repeat Steps 4 through 6 to input more characters.
2
8
Press NAME INPUT to store the Disc Name.
9
3
Repeat Steps 1 through 8 to assign Disc Names to
3
other discs
4
a.
‘p If you have made a mistake while inputting the character
To correct the character which has been input
1 Press 44 or bb until the incorrect character flashes
2 Press I44 or bbl until the desired character appears
To correct the character currently being input
1 Press CLEAR to delete the incorrect character
2 Input the correct character
To insert a character between the input characters
Press 44 or W until the cursor moves to the former of the two
characters, then press ENTER and input the correct character
1
Follow Steps 1 and 3 in “Labeling discs on the
player” on page 29 to select the Disc Name you
want to erase.
2 Press CLEAR repeatedly until all the characters
disappear.
3 Press MENU.
3ous
To Next Page
Loading...
