To Create a Smart Connect™ Event
1
From your Homescreen, tap , then find and tap .
2
If you are opening Smart Connect™ for the first time, tap OK to close the
introduction screen.
3
On the Events tab, tap .
4
If you are creating an event for the first time, tap OK again to close the
introduction screen.
5
Add conditions you want to trigger the event under. A condition could be the
connection with an accessory, or a specific time interval, or both.
6
Tap
to continue.
7
Add what you want to happen when you connect an accessory, and set other
settings as desired.
8
Tap
to continue.
9
Set an event name, then tap Finish.
To add a Bluetooth® accessory, you have to first pair it with your device.
To Edit a Smart Connect™ Event
1
Start the Smart Connect™ application.
2
On the Events tab, tap an event.
3
If the event is switched off, drag the slider to the right to turn it on.
4
Tap Edit event, then adjust the settings as desired.
To Delete an Event
1
Start the Smart Connect™ application.
2
On the Events tab, touch and hold the event you want to delete, then tap Delete
event
.
3
Tap Delete to confirm.
You can also open the event you want to delete, then tap
> Delete event > Delete.
Managing Accessories
Use the Smart Connect™ application to manage a range of smart accessories you can
connect to your device, including Xperia™ SmartTags, a SmartWatch series watch, or a
wireless headset from Sony. Smart Connect™ downloads any necessary applications
and also finds third-party applications, when available. Previously connected accessories
are shown in a list that allows you to get more information about the features of each
accessory.
To Pair and Connect an Accessory
1
Start the Smart Connect™ application. If you are opening Smart Connect™ for
the first time, tap OK to close the introduction screen.
2
Tap Accessories, then tap
.
3
Turn on the Bluetooth® function if it is not already on, then tap the name of the
accessory that you want to pair and connect with.
4
If required, enter a passcode, or confirm the same passcode on both your device
and the accessory.
To Adjust the Settings for a Connected Accessory
1
Pair and connect the accessory with your device.
2
Start the Smart Connect™ application.
3
Tap Accessories, then tap the name of the connected accessory.
4
Adjust the desired settings.
Using your device as a wallet
Use your device as a wallet to pay for goods without reaching for your real wallet. All of
your installed payment services are put together to be viewed and managed. Note that
94
This is an internet version of this publication. © Print only for private use.
To Next Page