To Next PageTo Next PageWhy does my Sony SLV-D370P remote commander not function?
If your Sony DVD VCR Combo remote commander isn't working, make sure of the following: * Point the remote commander at the remote sensor on the DVD-VCR. * Replace all the batteries in the remote commander with new ones if they are weak. * Make sure the TV / DVD·VIDEO switch is set correctly. * Select correctly VIDEO or DVD with the SELECT DVD/ VIDEO button.
Why is there no sound on my Sony SLV-D370P?
If there is no sound from your Sony DVD VCR Combo, try the following: * Re-connect the connecting cord securely. * If the connecting cord is damaged, the player may be connected to the wrong input jack on the amplifier (receiver). * Ensure the amplifier (receiver) input is correctly set. * Check if the player is in pause mode or in Slow-motion Play mode. * Verify the player is not in fast forward or fast reverse mode. * If the audio signal does not come through the DIGITAL AUDIO OUT (COAXIAL) jack, check the audio settings.
What to do if the disc does not play on Sony SLV-D370P?
If your Sony DVD VCR Combo disc does not play, check the following: * Ensure the disc is inserted with the playback side facing down on the disc tray. * The player cannot play certain discs. * The region code on the DVD does not match the player. * Moisture has condensed inside the player. * The player cannot play a recorded disc that is not correctly finalized. * Make sure the TV / DVD·VIDEO switch is set correctly. * Select correctly VIDEO or DVD with SELECT DVD/ VIDEO button.
Why is there no picture from VCR connected to LINE IN jacks on Sony SLV-D370P DVD VCR Combo?
If there is no picture from your VCR connected to the LINE IN jacks on your Sony DVD VCR Combo, the DVD player must be in standby mode to view pictures from your VCR.
What to do if Sony SLV-D370P DVD VCR Combo power is on but it does not operate?
If your Sony DVD VCR Combo power is on, but the unit isn't working, moisture condensation may have occurred. Turn the power off, unplug the AC power cord and leave the DVD-VCR to dry for over three hours.
How to fix playback picture that does not appear on TV screen for Sony SLV-D370P?
If the playback picture does not appear on the TV screen with your Sony DVD VCR Combo, make sure the TV is set to the channel for the VCR. If you are using a monitor, set it to video input.
How to fix a picture that is not clear on Sony SLV-D370P?
If the picture is not clear on your Sony DVD VCR Combo, try adjusting the tracking with the TRACKING +/– buttons. If the video heads are dirty, clean the video heads using a Sony video head cleaning cassette. If a Sony cleaning cassette is not available in your area, have the heads cleaned at your nearest Sony dealer (a standard service fee will be charged). The video heads may have to be replaced; consult your local Sony dealer for more information.
Why is the sound volume low on my Sony DVD VCR Combo?
If the sound volume is low on your Sony DVD VCR Combo, note that the sound volume is low on some DVDs. The sound volume may improve if you set “Audio DRC” to “Wide Range”.
Why does the picture have no sound on my Sony SLV-D370P DVD VCR Combo?
If the picture has no sound on your Sony DVD VCR Combo, the tape may be defective. If you made A/V connections, check the audio cord connection.
How to fix a TV program that does not appear on TV screen for Sony DVD VCR Combo?
If a TV program does not appear on the TV screen using your Sony DVD VCR Combo, make sure the TV is set to the channel for the VCR. If you are using a monitor, set it to video input. Select the correct source with the INPUT SELECT or CH +/– buttons. Select a channel number when recording TV programs; select “L1” or “L2” when recording from other equipment.
General| Brand | Sony |
|---|---|
| Model | SLV-D370P |
| Category | DVD VCR Combo |
| Language | English |
