Getting Started
8
Step 4
Tuning your TV to the VCR
1 Press ON/STANBY to turn on the VCR.
2 Press RF CHANNEL on the VCR.
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
3 Turn on your TV and select a programme position for the VCR
picture.
This programme position will now be referred to as the video
channel.
4 Press RF CHANNEL.
The TV system appears in the display window.
ON/STANDBY
RF CHANNEL
PROGRAM +/–
RF CHANNEL
AUTO SET UP
ON/STANDBY
To Next Page
Loading...
