Help Guide
Multi Channel AV Receiver
STR-AZ1000ES
Enjoying sound using speakers in Zone 3
You can enjoy sound from the unit in Zone 3 by the following procedure.
Hint
You can also activate the zone you want using ZONE SELECT and ZONE POWER on the unit.
You can also select source signals you want to output using INPUT SELECTOR on the unit while [3. xxxx (input name)] is shown on the display panel
by repeatedly pressing ZONE SELECT on the unit.
You can also adjust the volume using MASTER VOLUME on the unit while [3. xxxx (input name)] is shown on the display panel by repeatedly
pressing ZONE SELECT on the unit.
If you want to hear the same sound as the main zone in zone 3, select [SOURCE].
To exit Zone 3 function
Press ZONE 3
(power) on the remote control to turn off the Zone 3 power.
To exit Zone 3 operation
Select [Zone Controls] - [Zone3] - [Power] from the home menu, then select [Off].
Available inputs and functional restrictions in Zone 3
See “Available input sources for each zone.”
Hint
A dedicated App Sony | Music Center enables easier zone operation such as changing the settings or switching the zone inputs from your
smartphone or tablet.
Related Topic
Connecting 5.1-channel speaker system with Zone 3 connection
5-037-020-11(1) Copyright 2022 Sony Corporation
Press ZONE 3
(power) on the remote control.
1
Press ZONE 3 on the remote control.
2
While ZONE 3 on the remote control is lit in red, press the input button to select the source signal you want to output.
3
Start playback on the input device that you selected in step 3.
4
Adjust the volume.
Press ZONE 3 on the remote control, and press
(volume) +/– to adjust the volume while ZONE 3 on the remote control is lit in
red.
5
To Next Page
