Name
~
-1--
>10/·
CLEAR
12]
Numeric
buttons
(number
Sa)
~
SLEEP
~
TV INPUT
~
ZONE
I/C)
Function
Press to select the channel
entry mode, either one or two
digit
of
the VCR, satellite
tuner, etc.
Press
-1--
and
TV
([1§])
at the
same time to select the
channel entry mode, either
one
or
two digits
of
the TV.
Press to select
- track numbers over
10
of
the
VCR, satellite tuner,
MD
deck
or
CD
player.
- channel numbers
of
the
Digital
CATV
terminal.
Press to clear a mistake when
you press the incolTect
numeric button.
Press to
- preset/tune to preset
stations.
- select track numbers
of
the
CD
player,
DVD
player,
DVD
recorder,
MD
deck
or
Blu-ray disc player. Press
0110
to select track number
10.
- select channel numbers
of
the
VCR
or
satellite tuner.
Press the numeric buttons and
TV
([1§])
at the same time to
select the
TV
channels.
Press to activate the Sleep
Timer
function and the
duration which the receiver
turns
off
automatically.
Press
TV
INPUT
and
TV
c[1§])
at the same time to select the
input signal (TV input
or
video input).
Press
ZONE
I/C)
to turn the
zone 2 on
or
off.
a)The number 5,
MASTER
VOL
+.
TV
VOL
+,
and
C>-
buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
b)This button
is
also available for DIGITAL
MEDIA
PORT adapter operation. For details on the
function
of
the button, refer to the operating
instructions supplied with the DIGITAL
MEDIA
PORT adapter.
Notes
• Some functions explained
in
this section may not
work depending on the model.
• The above explanation
is
intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible
or
may operate differently than described.
ZONE INPUT Press
ZONE
INPUT
repeatedly to select the input
source for zone 2.
12
US
To Next Page
Loading...
