Sony STR-DA1500ES - Specifications; Audio, Tuner, and Power Specifications

~)INPDT SHORT (Bass: 0 dB, Treble: 0 dB).
)Weighted network.
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(Models of area code UC only)
With 8 ohms loads, both channels driven, from
20 - 20,000 Hz; rated 95 watts
per channel
minimum RMS power, with no more than
0.09% total
harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Models of area code UCI)
Minimum RMS Output Power
(8 ohms, 20 Hz -
20 kHz, THD 0.09%)
95 W +95 W
Stereo Mode Output Power
(8 ohms, 1kHz,
THD 0.7%)
105 W + 105 W
Outputs (Analog)
AUDIO OUT
Equalizer
Gain levels
AM tuner section
Tuning range
Area code
DC
Voltage: 150 mVIlO
kohms
±10 dB, 1 dB step
Tuning scale
10kHz step 9 kHz step
530 - 531-
1,710 kHz 1,710 kHz
I)Measured under the following conditions:
Area code
DC
Power requirements
120 V AC, 60 Hz
Antenna (aerial) Loop antenna (aerial)
Intermediate frequency
450 kHz
Power output (DIGITAL MEDIA PORT)
DC OUT: 5
V, 0.7 A MAX
Frequency response
PHONO
Analog
Inputs
PHONO
Analog
RIAA equalization curve
±0.5 dB
10 Hz -70 kHz
+0.5/-2 dB (Bass: 0 dB,
Treble: 0 dB)
Sensitivity: 2.5 mV
Impedance: 50 kohms
S/N2): 90 dB
(A, 20 kHz LPF)3)
Sensitivity: 150 mV/
50 kohms
S/N2): 96 dB
(A, 150 mV
3
)
Video section
Inputs/Outputs
Video:
General
Power requirements
Area code
DC
Power consumption
Area code
DC
1 Vp-pl75 ohms
Power requirements
120 V AC, 60 Hz
Power consumption
210W
56
US
Power consumption (during standby mode)
0.3 W (when "RS232C" is
set to "OFF")