Restricting
access
to
specific
channels
(Parental
Lock)
(SIRIUS
only)
You
can restrict access to certain channels
using your own lock code. The lock code
is
set
to
"0000"
as
the default.
Change the lock code before you use this
function for the first time. See "To change the
lock code" (page 40).
TUNER
AMP
MENU
1 Press TUNER repeatedly
to
select "SIRIUS".
You can also use INPUT SELECTOR on
the receiver.
2 Select a channel you want
to
lock
using
Category Tuning
(page 37)
or
Direct Tuning
(page 38).
3 Press AMP MENU.
"I-LEVEL" appears on the display.
4 Press
+,+
repeatedly
to
select
"3-TUNER".
40
US
5 Press e
or
+
to
enter the
menu.
6 Press
+,+
repeatedly
to
select
"PARENTAL".
7 Press e
or
+
to
enter the
parameter.
S Press
+'+
repeatedly
to
select
"ON"
then press
e.
"LOCK" appears on the display.
9 Enter
your
4-digit
lock
code
using the numeric buttons.
"LOCKED" appears on the display and
the Parental Lock
is
set.
To delete the numbers you have entered,
repeat the procedure above from step
3.
Select
"OFF'
in
step
8.
To change the
lock
code
1 Press TUNER repeatedly to select
"SIRIUS".
You
can also use INPUT SELECTOR on
the receiver.
2 Press AMP MENU.
"I-LEVEL" appears on the display.
3 Press
+1+
repeatedly to select
"3-TUNER".
4 Press
G)
or + to enter the menu.
S Press
+1+
repeatedly to select "CODE
EDT.".
6 Press
G)
or + to enter the parameter.
"CODE" appears on the display.
7 Enter your 4-digit lock code using the
numeric buttons.
"NEW" appears
on
the display.
S Enter a new 4-digit lock code using the
numeric buttons.
"CONE" appears on the display.
To Next Page
Loading...
