Settings
for
the
tuner
(TUNER
menu)
You can use the TUNER menu to set the FM
station receiving mode and to name preset
stations.
Select "3-TUNER"
in
the amplifier menus.
For details on adjusting the parameters, see
"Navigating through menus" (page 24) and
"Overview
of
the menus" (page 25).
TUNER
menu
parameters
•
FM
MODE (FM station receiving
mode)
• STEREO
This receiver will decode the signal as stereo
signal when the radio station
is
broadcast
in
stereo.
• MONO
This receiver will decode the signal as mono
signal regardless
of
the broadcast signal.
• NAME
IN
(Naming preset
stations)
Lets you set the name
of
preset stations. For
details, see "Naming preset stations" (page
32).
•
XM
ANT (XM antenna aiming
mode)
This parameter helps you to aim the
XM
antenna for optimal signal reception. For
details, see "Checking receiving conditions
(Antenna Aiming)" (page 35).
•
XM
10
(XM radio
10)
Lets you check the XM Radio ID. For details,
see "Checking the
ID
number" (page 34).
• PARENTAL (Parental lock)
Lets you restrict access to certain channels
using your own lock code. For details, see
"Restricting access
to
specific channels
(Parental Lock) (SIRIUS only)" (page 40).
• CODE EDT. (Sirius lock code
edit)
Lets you change the lock code. For details, see
"To change the lock code" (page 40).
• SR ANT (Sirius antenna aiming
mode)
This parameter helps you to aim the SIRIUS
antenna for optimal signal reception. For
details, see "Checking receiving conditions
(Antenna Aiming)" (page 35).
• SR
10
(Sirius radio 10)
Lets you check the Sirius Radio ID. For
details, see "Checking the
ID number" (page
34).
27
US
•
To Next Page
