You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
Using the controls on the
receiver
1 Press FM/AM repeatedly to select the
FM
or
AM
band.
2 Press TUNING MODE repeatedly to
select "PRESET".
3 Turn TUNING + or TUNING - to select
the preset station you want.
1 Press TUNER repeatedly to
select the FM or AM band.
2 Press PRESET + or PRESET -
repeatedly to select the preset
station you want.
Each time you press the button, you can
select a preset station as follows:
,==OI_02_03_04_0S_
...
_
27
:J
L--
__
l
30+-+29
+-+28+-1
----
"2
::::s
CD
~
o
"C
CD
Q;
-
o·
::::s
Ul
•
et
stations·
Tuning
to
p
4 Press the numeric buttons to
select a preset number.
You can also press PRESET + or
PRESET -
to
select a preset number.
If
"MEMORY" goes out before you
select the preset number, start again from
step
3.
5 Press ENTER.
You can also use MEMORYIENTER on
the receiver.
The station
is
stored as the selected preset
number.
If
"MEMORY" goes out before you press
ENTER, start again from step
3.
6 Repeat steps 1 to 5 to preset
another station.
AMP
MENU
MEMORY,
ENTER
PRESET
+/-
TUNER
4:\
'\D
'
+/+/./.
Numeric
buttons
You can preset up
to
30 FM stations and 30
AM stations. Then you can easily tune
in
the
stations you often listen to.
Presetting
radio
stations
2 Tune
in
the station that you
want to preset using Auto
Tuning (page 29) or Direct
Tuning (page 30).
In
case
of
poor FM stereo reception,
switch the FM reception mode (page 29).
3 Press MEMORY.
You can also use MEMORYIENTER on
the receiver.
"MEMORY" lights up for a few seconds.
Perform steps 4 and 5 before
"MEMORY" goes out.
1 Press TUNER repeatedly to
select the
FM
or
AM
band.
You can also use FM/AM on the receiver.
31
us
To Next Page
