Sony STR-DA2800ES - Page 113

113
US
Adjusting Settings
The following options are available in each menu.
“xx…” in the table signifies the parameter for each item.
Menu list (in the display window)
Menu Item Parameter
<AUTO CAL>
(Auto
Calibration)
A.CAL START
(Auto Calibration Start)
FH USE: x? Y, N
5 4 3 2 1
TONE
T.S.P.
WOOFER
COMPLETE RETRY, SAVE EXIT, WRN CHECK,
PHASE INFO., DIST. INFO., LEVEL
INFO., EXIT
C.MATCH? xxx Yes , N o
W-xxx:4x
(Warnig code)
FL, FR, CNT, SL, SR, SBR, SBL, SW, LH,
RH : 0, 1, 2, 3, 4
NO WARN
(No Warning)
xxx: xxx
(Phase Information)
FL, FR, CNT, SL, SR, SBR, SBL, SW, LH,
RH : OUT, IN
xxx: xxxxxx
(Distance Information)
FL, FR, CNT, SL, SR, SBR, SBL, SW, LH,
RH
xxx: xxxx dB
(Level Information)
FL, FR, CNT, SL, SR, SBR, SBL, SW LH,
RH
E-xx :3x
(Error code)
F, SR, SB : 0, 1, 2, 3, 4
RETRY? xxx YES, NO
CANCEL
CAL TYPE
(Calibration Type)
FULL FLAT, ENGINEER,
FRONT REF, OFF
A.P.M. A.P.M. AUTO, A.P.M. OFF
POSITION POS.1, POS.2, POS.3
NAME IN
(Naming Input)
For reference on this function, see “To
name the Position” (page 94).
continued