64
US
Adjusting the equalizer
You can use following parameters to adjust the
tonal quality (bass/treble level) of front,
surround/surround back and front high
speakers.
1 Select “Settings” from the
home menu, then press .
2 Select “Audio Settings,” then
press .
3 Select “Equalizer,” then press
.
4 Select “Front,” “Center,” “SUR/
SB,” or “Front High,” then press
.
5 Select “Bass” or “Treble.”
6 Adjust the gain, then press .
Notes
• This function does not work in the following case.
– “2ch Analog Direct” is being used.
• Frequencies for Bass and Treble are fixed.
• Depending on the audio format, the receiver may
play back signals at a lower sampling frequency
than the original sampling frequency of the input
signals.
To adjust all the speakers at one
time (All EQ Adjustment)
You can adjust the tonal quality (bass/treble)
of all the speakers at one time.
1 Select “Settings” from the home menu,
then press .
2 Select “Audio Settings,” then press .
3 Select “Equalizer,” then press .
4 Select “All,” then press .
5 Select “Bass” or “Treble,” then press
.
6 Adjust the gain, then press .
Note
Depending on the equalizer setting for each channel,
the actual levels set with the All EQ Adjustment may
be lower or higher than the specified values.
Level
(dB)
Bass Treble
Frequency
(Hz)
To Next Page
Loading...
