Sony STR-DA3700ES - Tuning; Listening to FM;AM Radio

58
US
Listening to FM/AM radio
1
Select “Listen” from the home
menu, then press .
2 Select “FM/AM,” then press .
The FM/AM screen appears.
3 Select the band switch.
4 Press V/v to select “FM” or
“AM,” then press .
1 Select the frequency indication
on the FM/AM screen.
2 Press V/v.
V scans from lower to higher frequency
stations and v for scanning higher to
lower.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
1
Tune in the station you want to listen to
using Auto Tuning, Direct Tuning
(page 58), or select the preset station
you want (page 59).
2 Press TOOLS/OPTIONS.
The option menu appears.
3 Select “STEREO/MONO,” then press
.
4 Select “MONO,” then press .
Enter the frequency of a station directly by
using the numeric buttons on the remote
control.
1 Press SHIFT, then press
D.TUNING on the FM/AM
screen.
2 Press the numeric buttons to
enter the frequency, then press
.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
Tuning
Toggling between FM and AM
radio
V/v/B/b,
HOME
TOOLS/
OPTIONS
D.TUNING
Numeric
buttons
SHIFT
Tuning to a station
automatically (Auto Tuning)
Tuning into a station directly
(Direct Tuning)