Sony STR-DB798 Operating Instructions

Getting Started
masterpage:Right
lename[E:\SEM_Janet\Revision
D
ata\J9051275_2598516131DB798CEL\2598516131\GB03CON_STR-DB798-CEL.fm]
21
GB
model name1[STR-DB798]
[2-598-516-13(1)]
4 Press TEST TONE again after
adjustment.
The test tone turns off.
To output the test tone only from
a specific speaker
Set “T. TONE” in the LEVEL menu to “FIX”
(page 38). The test tone is output only from the
selected speaker.
For more precise adjustment
You can output the test tone or sound source
from two adjacent speakers to adjust their
balance and level.
Set “MENU XXX” in the CUSTOMIZE menu
to “MENU EXP.” (page 40). Then select the two
speakers you want to adjust using “P. NOISE”
or “P. AUDIO” in the LEVEL menu (page 43).
Notes
• The test tone cannot be used when ANALOG
DIRECT or MULTI CH IN function is used.
• Although these adjustments can also be made via the
front panel using the LEVEL menu (when the test
tone is output, the receiver switches to the LEVEL
menu automatically), we recommend you follow the
procedure described above and adjust the speaker
levels from your listening position using the remote.
GB01COV_STR-DB798-CEL.book Page 21 Thursday, August 18, 2005 8:59 AM

Sony STR-DB798 Specifications

General

Impedance	8 Ω
Supported radio bands	FM
Radio Data System (RDS)	Yes
Channels quantity	7 channels
I/O ports	Output(Component x 1, Optical Digital x 1, Composite x 1, S-Video x 1), Input(Component x 2, Optical Digital x 4, S-Video x 4, Coaxial Digital x 2, Composite x 4)