Sony STR-DB798 Operating Instructions

Advanced Adjustments and Settings
masterpage:Right
lename[E:\SEM_Janet\Revision
D
ata\J9051275_2598516131DB798CEL\2598516131\GB06ADV_STR-DB798-CEL.fm]
37
GB
model name1[STR-DB798]
[2-598-516-13(1)]
You can assign a component video input for
another visual input.
1 Press MAIN MENU repeatedly to select
“CUSTOM”.
2 Turn MENU to select “COMP. V. A.”.
3 Press MEMORY/ENTER.
4 Turn MENU to select the component
video input you want to assign.
5 Turn –/+ to select the visual input you
want to assign the component video
input jacks selected in step 4.
The input you can assign varies for each
component video input. For details, see
“Selectable visual inputs for each
component video input”.
Selectable visual inputs for each
component video input
The initial setting is underlined.
Note
You cannot assign a visual input to more than one
component video input.
You can switch the audio input mode for
components which have digital audio input
jacks.
1 Turn INPUT SELECTOR to select the
input.
2 Press INPUT MODE repeatedly to
select the audio input mode.
The selected audio input mode appears in
the display.
Audio input modes
x AUTO IN (AUTO 2CH)
Gives priority to digital signals when there are both
digital and analog connections. If there are no digital
signals, analog is selected.
x COAX IN (COAX FIXED)
Specifies the digital audio signals input to the
DIGITAL COAXIAL input jack.
x OPT IN (OPT FIXED)
Specifies the digital audio signals input to the
DIGITAL OPTICAL input jacks.
x ANALOG (ANALOG FIXED)
Specifies the analog audio signals input to the AUDIO
IN (L/R) jacks.
Notes
• When signals with a sampling frequency of more
than 48 kHz is input, the equalizer and sound field
cannot be used.
• Some audio input modes may be dimmed depending
on the input. This means that the selected input is
unavailable.
Advanced Adjustments and Settings
Assigning the component
video input
— COMPONENT VIDEO INPUT
ASSIGN
(Assignable
component video
inputs)
Selectable visual inputs
Display
(DVD)
VIDEO 1
VIDEO 2
VIDEO 3
DVD
DVD- VD1
DVD- VD2
DVD- VD3
DVD- DVD
(TV/SAT)
VIDEO 1
VIDEO 2
VIDEO 3
TV/SAT
TV - VD1
TV - VD2
TV - VD3
TV - TV
Switching the audio input
mode for digital
components
— INPUT MODE
GB01COV_STR-DB798-CEL.book Page 37 Thursday, August 18, 2005 8:59 AM

Sony STR-DB798 Specifications

General

Impedance	8 Ω
Supported radio bands	FM
Radio Data System (RDS)	Yes
Channels quantity	7 channels
I/O ports	Output(Component x 1, Optical Digital x 1, Composite x 1, S-Video x 1), Input(Component x 2, Optical Digital x 4, S-Video x 4, Coaxial Digital x 2, Composite x 4)