2
3
Selected input Components that can
[Display] be played back
VIDEO 1 VCR. etc.. cunnected to
[VIDEO I1 the VIDEO 1.jack
VIDEO 2 Blu-ray disc player, etc.,
[VIDEO 2/BD] _- connected to the VIDE()
2/BD .jack
DVD DVD player, etc.,
[DVD] connected to DVD jack
SAT Satellite tuner, etc.
[SAT] connected to the SAT jack
TV TV, etc. connected to the
[TV] TV jack
SA-CD/CD Super Audio CD/CD
[SA-CD/CD] player, etc.. counected to
the SA-CD/CD jack
TUNER Built-in radio tuner
[FM or AM band]
: "VIDEO 2/BD" scrolls across the display,
then "VIDEO 2" appears.
Turn on the component and
start playback.
Press MASTER VOL +/- to
adjust the volume.
You can also use MASTER VOLUME on
the receiver.
To activate the muting function
Press MUTING.
The nmting function will be canceled when
you do the following.
• Press MUTING again.
• Increase the volume.
• Turn off the receiver.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
33 G8
To Next Page
Loading...
