Resettingsoundfields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
1,2
1
2
2
Press I/_ to turn off the power.
While holding down 2CH, press
I/_.
"S.F. CLR." appears on tiledisplay and
all sound fields are reset to their initial
setting.
Listeningto FM/AMradio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver (page
25).
Tip
The tuning scale lot direct tuning differs depending
on the area code as shown irathe lolIowing table. For
details on area codes, see page 3.
Area code FM AM
U. CA 100 kHz IO kHz*
CEL, CEK, AU, TW, 50 kHz 9 kHz
KR, TH6, SP
E2 50 kHz 9 kHz ,_
: The AM tuning scale can be changed (page 68).
52 G8
To Next Page
Loading...
