7
Notes
• Relier to the operating
instructions supplied with the
TV and DVD player.
• Check the lk_llowing if you
cannot listen to multi channel
souud.
Be sure this receiver is
connected to the DVD player
via a digital conuectiou.
Be sure the digital audio
output of the DVD player is set
up properly.
Tips
• Select the sound lbrmat of the
disc to be played, if necessary.
• You can select the sound field to
suit the movie/music. Reli:r to
page 46 lor details.
Recommended sound fields:
Movie: C.ST.EX
Music: CONCERT
7
3
1 Turn on the TV and DVD player.
2 Turn on the receiver.
3 Press DVD.
You can also use INPUT SELECTOR on this receiver to
select "DVD".
4 Switch the input of the TV so that an image
of the DVD is displayed.
5 Set up the DVD player.
Refer to "Quick Setup Guide" supplied with tile receiver.
6 Play back the disc.
7 Adjust to a suitable volume.
8 After you have finished watching the DVD,
eject the disc and turn off the receiver, TV
and DVD player.
35 G8
To Next Page
Loading...
