Types of A.F.D. mode
Decoding A.F.D. mode Multi channel Effect
mode [Display] audio after
decoding
(Detecting A.F.D. AUTO (Detecting Presents the sound as it was recorded/
automatically) [A.F.D. AUTO] automatically) encoded without adding any surround
effects. However. this receiver will
generate a low frequency signal for output
to the sub woofer when there is no LFE
signals.
Dolby Pro Logic PRO LOGIC 4 channel Perlbrms Dolby Pro Logic decoding. The
[DOLBY PL] source recorded in 2 channel lunnat is
decoded into 4. I channels.
5 channel Performs Dolby Pro Logic II Movie modeDolby Pro Logic PRO LOGIC I1 MOVIE
lI [PLII MV] decoding. This setting is ideal li}r movies
encoded in Dolby Surround. In addition.
this mode can reproduce sound in 5.1
channel lbr watching videos of overdubbed
or old movies.
PRO LOGIC I1 MUSIC 5 channel Perlorms Dolby Pro Logic II Music mode
[PLII MSI decoding. This setting is ideal 1ornormal
stereo sources such as CDs.
(Multi Stere()) MULTI STEREO (Multi Stere()) Outputs 2 channel lefl/right signals l?'om
[MULTI ST.] all speakers. However. sound may not be
output from certain speakers depending on
the speaker settings.
m
o
e-
e"
D.
O
e,
D.
continued_
47G8
To Next Page
Loading...
