Sony STR-DH540 - 5: Connecting the Antennas (Aerials); 6: Connecting the AC Power Cord (Mains Lead)

27
GB
Connections
5: Connecting the
antennas (aerials)
Before connecting the antennas (aerials),
be sure to disconnect the AC power cord
(mains lead).
• To prevent noise pickup, keep the AM loop
antenna (aerial) away from the receiver and
other equipment.
• Be sure to fully extend the FM wire antenna
(aerial).
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
6: Connecting the AC
power cord (mains lead)
Connect the AC power cord (mains lead) to
a wall outlet.
Notes
FM wire antenna (aerial)
(supplied)
AM loop antenna (aerial)
(supplied)
AC power cord (mains lead)
To the wall outlet