Sony STR-DH540 - Resetting the Input Buttons

67
GB
Using the Remote Control
3 Referring to the following table,
press the corresponding button for
the category you want, then
release TV ?/1.
Example: Press 1, then release TV ?/1.
Now you can use the SAT/CATV
button to control the Blu-ray Disc
player.
a)
For details on the BD1 or BD3 setting,
refer to the operating instructions supplied
with the Blu-ray Disc player or Blu-ray
Disc recorder.
b)
Sony DVD recorders are operated with a
DVD1 or DVD3 setting. For details, refer
to the operating instructions supplied with
the DVD recorders.
c)
Sony VCRs are operated with a VTR 3
setting which corresponds to VHS.
Resetting the input
buttons
1
While holding down 2 –, press
and hold ?/1, then press TV INPUT.
2 Release all buttons.
The input buttons are reset to the
default settings.
Categories Press
Blu-ray Disc player
(command mode BD1)
a)
1
Blu-ray Disc recorder
(command mode BD3)
a)
2
DVD player
(command mode DVD1)
3
DVD recorder
(command mode DVD3)
b)
4
VCR
(command mode VTR3)
c)
5
CD player 6
2 –
?/1
TV INPUT