How to fix Sony STR-DN1030 Receiver when Dolby Digital or DTS multi channel sound is not reproduced?
- BBrett BurnsAug 28, 2025
If Dolby Digital or DTS multi channel sound is not being reproduced, verify the format of the content being played. When connecting the DVD player, etc., to the digital input jacks of this receiver, make sure the digital audio output setting of the connected equipment is available. Ensure 'Audio Out' is set to 'AMP' in the HDMI Settings menu. Note that you can enjoy High Bitrate Audio (DTSHD Master Audio, Dolby TrueHD), Multi Channel Linear PCM only with an HDMI connection.














