Note
This function does not work in the following cases:
[Pure Direct] is set to [On].
[Bluetooth Mode] is set to [Transmitter].
[DSD Native] is set to [On] and a DSD file is played back.
Frequencies for [Bass] and [Treble] are fixed.
Depending on the audio format, the receiver may play signals at a lower sampling frequency than the
original sampling frequency of the input signals.
Only [Bass] gain and [Treble] gain are available for [Front] when headphones are connected.
Hint
You can also select [Equalizer] in [Sound Effects] from the home menu.
[155] Adjusting Settings Speaker Settings
Lifting up the sound of the center speaker (Center
Speaker Lift Up)
By using the front high speakers, you can lift up the sounds of the center speaker to an
appropriate height on the screen, allowing you to enjoy natural sound without discomfort.
Note
This function does not work in the following cases:
Headphones are connected.
There is no center speaker.
There are no front high speakers.
[2ch Stereo] or [Multi Ch Stereo] is being used.
A sound field for music is being used.
[Bluetooth Mode] is set to [Transmitter].
Select [Equalizer].
2
Select [Front], [Center], [Surround] or [Front High].
3
Select [Bass] or [Treble].
4
Adjust the gain.
5
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Center Speaker Lift Up].
2
Select the setting you want.
1 - 10
Off
3
To Next Page
Loading...
