Turning on the control mode for maintenance
(External Control)
You can set whether a dedicated controller (home automation controller) on the home network
is allowed to control the receiver.
[198] Adjusting Settings
Bluetooth Settings
Selecting the BLUETOOTH mode (Bluetooth Mode)
You can enjoy content from remote devices via this receiver, or listen to sound from this
receiver via a BLUETOOTH receiver such as headphones.
Note
[Bluetooth Mode] cannot be switched while the input of the receiver is set to [Bluetooth] or [Screen
mirroring].
No sound is output from the speakers connected to the receiver when [Bluetooth Mode] is set to
[Transmitter].
In [Transmitter] mode, the receiver can send audio to up to 1 device.
Hint
You can set the transmission data rate for LDAC playback using [Wireless Playback Quality] in the
[Bluetooth Settings] menu.
If you connect to the receiver from your smartphone while [Transmitter] is selected and no other
BLUETOOTH receiver is connected to the receiver, the setting automatically switches to [Receiver]
and you can listen to the sound from your smartphone via the receiver.
You can also switch between [Receiver] (RX) mode and [Transmitter] (TX) by pressing
RX/TX on
the remote control.
Depending on the BLUETOOTH receiver, you can adjust the volume of the BLUETOOTH receiver
from the receiver when [Transmitter] is selected.
Select [Setup] - [Network Settings] from the home menu.
1
Select [External Control].
2
Select [On] or [Off].
3
Select [Setup] - [Bluetooth Settings] from the home menu.
1
Select [Bluetooth Mode].
2
Select the setting you want.
Receiver: The receiver is in receiver mode which enables it to receive and output
audio from a BLUETOOTH device.
Transmitter: The receiver is in transmitter mode which enables it to send audio to a
BLUETOOTH receiver (such as headphones).
[BT TX] appears on the display panel.
Off: The BLUETOOTH power is turned off and [Listen] - [Bluetooth] cannot be selected
from the home menu.
3
To Next Page
Loading...
