Saving and recalling various settings for the receiver (Custom Preset)
About Custom Preset [129]
Saving the settings to a preset [130]
Recalling the settings saved to the scene [131]
Items for which you can save settings and the default values for each item [132]
Using the sleep timer
Using the sleep timer (Sleep) [133]
Checking information on the receiver
Viewing information on the display panel [134]
Adjusting Settings
Easy Setup
Setting up the receiver using Easy Setup [135]
Performing Auto Calibration
1. About Auto Calibration [136]
2. Before you perform Auto Calibration [137]
3. Connecting the calibration microphone [138]
4. Selecting the front speakers [139]
5. Performing Auto Calibration [140]
6. Checking Auto Calibration results [141]
Calibrating the phase characteristics of the speakers (A.P.M. (Automatic Phase
Matching)) [142]
Selecting the Auto Calibration type (Calibration Type) [143]
Speaker Settings
Selecting the speaker pattern (Speaker Pattern) [144]
Checking the speaker position and the corresponding speaker terminals (Speaker
Connection Guide) [145]
Assigning the surround speaker terminals (Surround Speaker Assign) [146]
Assigning the surround back speaker terminals (Surround Back Speaker Assign)
[147]
Setting the priority on the surround back speakers or Zone 2 speakers
(SURROUND BACK/ZONE2 Priority) [148]
Adjusting the speaker size (Size) [149]
Adjusting the speaker distance (Distance) [150]
Adjusting the speaker level (Level) [151]
Outputting a test tone from each speaker (Test Tone) [152]
Setting the crossover frequency of the speakers (Crossover Frequency) [153]
Adjusting the equalizer (Equalizer) [154]
Lifting up the sound of the center speaker (Center Speaker Lift Up) [155]
Setting the height from the floor to the ceiling speakers (Ceiling Speaker Height)
[156]
Selecting the unit of measurement (Distance Unit) [157]
To Next Page
Loading...
