Note
This function does not work in the following cases:
[FM TUNER] is selected as the input.
The software of the receiver is being updated.
BLUETOOTH headphones are connected.
If you use the Auto Standby mode and the sleep timer at the same time, the sleep timer has priority.
[209] Adjusting Settings System Settings
Switching the brightness of the display panel
(Dimmer)
Switch the brightness of the display panel.
Hint
You can also use the DIMMER button on the receiver.
[210] Adjusting Settings System Settings
Using the sleep timer (Sleep)
You can set the receiver to turn off automatically after a specified period of time.
Select [Auto Standby].
2
Select [On] or [Off].
When you select [On], the receiver switches to standby mode after approximately 20
minutes.
3
Select [Setup] - [System Settings] from the home menu.
1
Select [Dimmer].
2
Select the setting you want.
Off
Dark
Bright
3
Select [Setup] - [System Settings] from the home menu.
1
Select [Sleep].
2
Set specified time.
2:00:00
1:30:00
3
To Next Page
Loading...
