You can select from a variety of sound field modes according to speaker connections or input
sources.
Note
You cannot select sound fields when [Bluetooth Mode] is set to [Transmitter].
When connecting headphones to the receiver, you can only select [Headphone(2ch)] as a sound
field.
The sound fields for movie and music may not work, depending on the input or the speaker pattern
you select, or with audio formats.
The receiver may play signals at a lower sampling frequency than the actual sampling frequency of
the input signals, depending on the audio format.
[Pro Logic llx Movie] or [Pro Logic llx Music] may not appear, depending on the speaker pattern you
select.
Some speakers or the subwoofer may not output sound, depending on the sound field setting.
Hint
You can also use 2CH/MULTI, MOVIE, MUSIC or FRONT SURROUND on the remote control to
select a sound field.
You can also select [Sound Field] in the [Audio Settings] menu.
[161] Adjusting Settings Audio Settings
Selecting the HD-D.C.S. effect type (HD-D.C.S. Type)
Select the HD-D.C.S. effect type you want.
Note
This function works only when the sound field is set to [HD-D.C.S.].
This function does not work in the following cases:
Headphones are connected.
[Bluetooth Mode] is set to [Transmitter].
[DSD Native] is set to [On] and a DSD file is played back.
Select [Sound Effects] - [Sound Field] from the home menu.
1
Select the sound field you want.
For movies, select a sound field labeled with [Movie].
For music, select a sound field labeled with [Music].
2
Select [Setup] - [Audio Settings] from the home menu.
1
Select [HD-D.C.S. Type].
2
Select the setting you want.
Dynamic
Theater
Studio
3
To Next Page
Loading...
