Sony STR-DN1070 - Page 121

Note
This function works only when video signals are received via the HDMI IN jacks.
HDMI input signal must be 1080p/24 Hz 2D signal.
The HDMI OUT B/HDMI ZONE jack does not support [HDMI In 4K Scaling]. Video signals are output
in the same resolution as the input resolution.
[177] Adjusting Settings HDMI Settings
Controlling HDMI devices (Control for HDMI)
You can turn the Control for HDMI function on or off. For details, see “Preparing to use
“BRAVIA” Sync function.”
Note
When you set [Control for HDMI] to [On], [Audio Out] may be changed automatically.
When the receiver is in standby mode, the power indicator on the front panel lights up in amber if
[Control for HDMI] is set to [On].
This function works only when [HDMI Out B Mode] is set to [Main].
[178] Adjusting Settings HDMI Settings
Turning off the receiver and connected devices
simultaneously with the TV (System Power Off
function) (Standby Linked to TV)
You can turn off the receiver and the connected device automatically when you turn off the TV.
Select [HDMI In 4K Scaling].
2
Select the setting you want.
Auto: Enables video scaling control of 4K HDMI output automatically if you connect a
4K-compatible TV.
Off
3
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [Control for HDMI].
2
Select [On] or [Off].
3
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [Standby Linked to TV].
2
Select the setting you want.
Auto: When the input of the receiver is set to [TV], [BD/DVD], [GAME], [SAT/CATV],
3