Digital broadcast language selection [DUAL MONO]
MAIN/SUB, MAIN, SUB
Dynamic Range Compressor [D. RANGE]
COMP. ON, COMP. AUTO, COMP. OFF
HDMI settings [<HDMI>]
HDMI In 4K Scaling [4K SCALING]
AUTO, OFF
Control for HDMI [CTRL: HDMI]
CTRL ON, CTRL OFF
Standby Link to TV [STBY LINK]
ON, AUTO, OFF
Standby Through [STBY THRU]
ON, AUTO, OFF
HDMI Out B Mode [OUTB MODE]
MAIN, ZONE
Priority [PRIORITY]
MAIN&ZONE, MAIN ONLY
HDMI Audio Out [AUDIO OUT]
AMP, TV+AMP
HDMI Subwoofer Level [SW LEVEL]
SW AUTO, SW +10 dB, SW 0 dB
HDMI Signal Format [SIGNAL FMT.]
STANDARD, ENHANCED
BLUETOOTH settings [<BT>]
BLUETOOTH Mode [BT MODE] (*13)
RECEIVE, TRANSMIT, OFF
BLUETOOTH AAC [BT AAC] (*14)
AAC ON, AAC OFF
BLUETOOTH LDAC [BT LDAC] (*14)
LDAC ON, LDAC OFF
Wireless Playback Quality [QUALITY] (*15)
AUTO, SOUND, STANDARD, CONNECTION
BLUETOOTH Standby [BT STANDBY] (*14)
STBY ON, STBY OFF
System settings [<SYSTEM>]
Remote Start [RM START]
ON, OFF
Auto standby mode [AUTO STBY]
STBY ON, STBY OFF
Quick Start/Network Standby [QUICK.START] (for USA, Canadian and Oceanian models
only)
MODE ON, MODE OFF
Version display [VERSION] (*16)
XXX.X.XXXX
Sleep timer [SLEEP]
OFF, 0:30:00, 1:00:00, 1:30:00, 2:00:00
A speaker pattern that includes front high speakers is selected.
Headphones are connected.
[Bluetooth Mode] is set to [Transmitter].
Headphones are connected.
[2ch Stereo] or [Multi Ch Stereo] is being used.
A sound field for music is being used.
[Bluetooth Mode] is set to [Transmitter].
You can select this setting only when you have performed Auto Calibration and saved the settings.
*1
Some parameters or settings may not be available depending on the speaker pattern setting.
*2
XXX represents a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, LH, RH, SW).
*3
You cannot select this parameter in the following cases:
*4
You can only select this parameter if [SP PATTERN] is set to a pattern with center speaker and front high
speakers. (i.e. 7.1 (FH), 7.0 (FH))
*5
You cannot select this parameter in the following cases:
*6
You can only select this parameter if [SP PATTERN] is not set to a pattern with surround speakers. (i.e. 3.1, 3.0,
2.1, 2.0)
*7
You can only select this parameter if [SP PATTERN] is not set to a pattern with surround back and front high
speakers. (i.e. 5.1, 5.0, 4.1, 4.0, 3.1, 3.0, 2.1, 2.0)
*8
You can only select this parameter if the speaker is set to [SMALL].
*9
Sometimes the settings are dimmed and cannot be selected.
*10
You can only select this parameter if you select [HD-D.C.S.] as the sound field.
*11
This parameter appears dimmed and cannot be selected except when [FM TUNER] is selected.
*12
You cannot select this parameter when [Bluetooth] or [Screen mirroring] function is selected.
*13
You cannot select this parameter in the following cases:
*14
To Next Page
Loading...
