[67] Enjoying Video and Sound Enjoying sound effects
Adjusting the equalizer (Equalizer)
You can use the following parameters to adjust the tonal quality (bass/treble level) of the front,
center, surround/surround back and front high speakers.
Level (dB)
Frequency (Hz)
Bass
Treble
Note
This function does not work in the following cases:
[Pure Direct] is set to [On].
[Bluetooth Mode] is set to [Transmitter].
[DSD Native] is set to [On] and a DSD file is played back.
Frequencies for [Bass] and [Treble] are fixed.
Depending on the audio format, the receiver may play signals at a lower sampling frequency than the
original sampling frequency of the input signals.
Only [Bass] gain and [Treble] gain are available for [Front] when headphones are connected.
Hint
You can also select [Equalizer] in [Sound Effects] from the home menu.
[68] Enjoying Video and Sound Enjoying sound effects
Enjoying clear and dynamic sound at a low volume
(Sound Optimizer)
Hold down MUSIC and press (power) on the receiver.
[S.F. CLEAR] appears on the display panel and all sound fields are reset to their default
setting.
2
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Equalizer].
2
Select [Front], [Center], [Surround] or [Front High].
3
Select [Bass] or [Treble].
4
Adjust the gain.
5
To Next Page
Loading...
