Note
A server will appear in the server list even after being deleted from the list if the receiver finds it on
the network (such as when you refresh the server list).
[79] Using Network Features Enjoying content stored on a server on the home network
(DLNA)
Setting whether to control this receiver from a
controller device on the home network (Home
Network Access Control)
You can check a list of products compatible with a controller on the home network and set
whether or not each product is accessible via this receiver.
[80] Using Network Features
Enjoying audio content from iTunes or an iPhone/iPad/iPod via
the network (AirPlay)
Compatible iPhone/iPad/iPod models
You can use the following iPhone/iPad/iPod models on this receiver. Update your
iPhone/iPad/iPod with the latest software before using it.
BLUETOOTH technology works with
iPhone:
iPhone 6s Plus/iPhone 6s/iPhone 6 Plus/iPhone 6/iPhone 5s/iPhone 5c/iPhone 5/iPhone
4s/iPhone 4
Select the server which you want to delete and press OPTIONS.
3
Select [Remove] from the options menu.
4
Select [OK] on the confirmation display.
[The device has been removed from the list.] appears on the TV screen, and the selected
server is deleted.
5
Select [Setup] - [Network Settings] from the home menu.
1
Select [Home Network Access Control].
A list of registered controllers appears (up to 40 devices).
2
Select the controller you want to set and press
.
3
Select the setting you want.
Allow: Permits access from the controller.
Block: Blocks access from the controller.
4
To Next Page
Loading...
