EasyManua.ls Logo

Sony STR-DN1070 - BLUETOOTH Settings; Selecting BLUETOOTH Mode

Sony STR-DN1070
169 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error messages
PROTECTOR [221]
An over-current from the USB port was detected. [222]
List of messages after Auto Calibration measurements [223]
General
The receiver is turned off automatically. [224]
Cannot find an available input when connecting several digital devices. [225]
The receiver does not turn on even when the TV is turned on. [226]
The receiver turns off when the TV is turned off. [227]
The receiver does not turn off even when the TV is turned off. [228]
Image
No image appears on the TV screen. [229]
No 3D content appears on the TV screen. [230]
No 4K content appears on the TV screen. [231]
No image is output from the TV screen when the receiver is in standby mode.
[232]
The home menu does not appear on the TV screen. [233]
The display panel is turned off. [234]
Image does not appear on the TV screen when the receiver is not turned on. [235]
When the language for the on-screen display of the TV is changed, the on-screen
display language of the receiver is changed simultaneously. [236]
Sound
No sound or only a very low level of sound is heard, no matter which device is
selected. [237]
There is severe humming or noise. [238]
No sound or only a very low level of sound is heard from specific speakers. [239]
There is no sound from a specific device. [240]
There is no sound from the TV via the HDMI OUT A (TV) jack when using the
Audio Return Channel function. [241]
The left and right sound is unbalanced or reversed. [242]
Dolby Digital or DTS multi-channel sound is not reproduced. [243]
The surround effect cannot be obtained. [244]
A test tone is not output from the speakers. [245]
A test tone is output from a different speaker than the speaker displayed on the TV
screen. [246]
No sound is output from the TV when the receiver is in standby mode. [247]
No TV sound is output from the receiver. [248]
Image and sound are not output from the TV when the receiver is not turned on.
[249]
The sound is output from both the receiver and the TV. [250]
Tuner
The FM reception is poor. [251]
The FM stereo reception is poor. [252]
You cannot tune to radio stations. [253]
RDS does not work (for European and Oceanian models only). [254]
The RDS information that you want does not appear (for European and Oceanian

Table of Contents

Other manuals for Sony STR-DN1070

Related product manuals