If [Standby Through] is set to [Auto] or [On], and the TV sound was output from the speakers of the
TV last time you watched the TV, the receiver does not turn on and the sound and picture are output
from the TV even if you play content on the device.
Depending on the TV, the beginning part of content being played may not play correctly.
One-Touch Play function may work with other devices than those manufactured by Sony, but
operation is not guaranteed.
[121] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync)
Selecting the optimum picture quality and sound field
automatically (Scene Select function)
The sound field are selected automatically according to the Scene Select or Sound Mode
setting on your TV.
For details on this operation, refer to the operating instructions of the TV.
The Scene Select/Sound Mode setting and the sound field setting of the receiver will change as
follows.
Cinema: HD-D.C.S.
Sports: Sports
Music: Live Concert
Animation: Multi Ch Stereo
Photo: Multi Ch Stereo
Game: Multi Ch Stereo
Graphics: Multi Ch Stereo
Note
The Scene Select function is a function developed by Sony, and cannot be used on other devices
than those manufactured by Sony.
[122] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync)
About Home Theatre Control function
Setting the receiver, the sound field settings, input switching, etc., can be done by selecting the
Home Theatre Control application on the TV.
This function can be used when the TV is compatible with the Home Theatre Control application
and connected to the Internet. For details, refer to the operating instructions of the TV.
Note
The Home Theatre Control application is a function developed by Sony, and cannot be used on other
devices than those manufactured by Sony.
[123] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync)
Operating the receiver menu using the TV remote
control (Remote Easy Control function)
You can select the receiver by the SYNC MENU of the TV and operate the receiver. This
function can be used if the TV supports the SYNC MENU. For details, refer to the operating
instructions of the TV.
Note
To Next Page
Loading...
