Sony STR-NX3 Service Manual

7
CD MECHANISM DECK SECTION
(CDM53D-K1BD33)
TAPE MECHANISM DECK SECTION
(TCM-230AWR2)
3 four screws
(BVTP3 × 10)
1 flat cable (17 core)
(12 cm) (CN112)
4 Remove the CD mechanism deck
section (CDM53D-K1BD33) in
the arrow A direction.
1 flat cable (19 core)
(CN111)
2 connector
(CN713)
A
to fitting base (guide)
ass’y, bracket (chassis)
and magnet ass’y
(page 9)
4 two screws
(BVTP3 × 10)
1 step screw
1 step screw
5 Remove the tape mechanism deck
section (TCM-230AWR2) in the
arrow A direction.
2 spring (eject B)
3 spring (eject A)
6 step screw
8 eject lever (A)
qa bracket (MD A)
qs shield plate
q; bracket (MD B)
7 eject lever (B
)
6 step screw
9 two screws
(BVTT 2.6 × 6)
A

Sony STR-NX3 Specifications

General

Brand	Sony
Model	STR-NX3
Category	Tuner
Language	English